Klarstein Skal Bedienungsanleitung Seite 32

EN
32
The Heineken connector that comes with your beer cooler can work with all Heineken
5 L kegs. However you must use a flat head screwdriver to remove the green base from
the keg in order to install the new connector, provided with the beer cooler.
When install the new connector to the Heineken keg, you must firstly install the clear
beer tube one end to the connector, one end to the tap mechanism, then install the
connector to the Heineken keg.
Clear hose
Remove the green
plastic cap from the
keg.
Take out the Heineken adaptor with
collect ways, Press it according the
arrow indication, or will damage the
fastener.
Close the lid. Perform steps 6-12 as for the universal drum. Step 9 is different.
Heineken Connector
Connector