Inhaltsverzeichnis
Werbung
Getting to know
the control panel
To utilise all the functions of your
appliance, we recommend that you
familiarise yourself thoroughly with
the control panel and its options.
Operation and display
Your new appliance features a touch
sensitive screen, i.e. when the panel is
touched, the corresponding response
is actuated.
Below are explanations of the buttons
and their function.
u Use the < and > buttons
a) to select parameters,
b) to select mother steps suggested by
the menu.
v Acknowledge the selected parameters
with the ok button. If the button is not
pressed after changing the parameters
with the < and > buttons, the previous
settings remain active.
w The menu button is used to select
the menus (see following section). Press
the button to jump to the next menu.
x The alarm button acknowledges
an alarm emitted by the appliance and
switches off the warning signal.
Warning
An alarm emitted by the appliance
may have several causes. See Warning
messages via the display".
y Use the freezer section button
a) to set the temperature of the freezer
section,
b) to switch the freezer section to another
temperature range (vario function).
U Use the fridge section button to make
the same settings as described under y
for the fridge section.
V Use the super/freezer section button
to switch on/off the super" function for
the freezer section.
W Use the super/fridge section button
to switch on/off the super" function for
the fridge section.
Note
- Only the active buttons are lit on the
control panel. Only these buttons are
available for other operating steps.
- If none of the active buttons is pressed
in the available menus and submenus,
the standard display is automatically
restored after 10 sec.
en
33
Werbung
Inhaltsverzeichnis
