mastro 65/70 BRE Bedienungsanleitung Seite 18

3.2 TILTING PANS WITH HINGED COVER
For good performance of the tilting pan during cooking we suggest that you close the pan by
lowering the cover.
To guarantee efficient operation the following check should be carried out:
daily; before you release the handle after opening the tilting pan cover check that it remains
in the raised position;
twice a year; have the balancing spring of the cover checked by an authorised technician.
NB: Do not put your hands under the cover when it is lifted. At the end of cooking process,
open the cover with caution to avoid burning your hands owing to hot steam blowing off or by
contact with hot surfaces.
3.3 TILTING PAN WITH MANUAL TILT MECHANISM
Pan raising makes emptying the pan easier. The raising and lowering movement is carried
out by turning the handwheel located on the right-hand side of the front panel.
3.4 TILTING PAN WITH POWERED TILT MECHANISM
The three buttons on the front panel are used for this type of pan movement.
- To raise the pan keep the yellow button (arrow pointing upwards) pressed down until the
pan automatically reaches its maximum tilted position. When emptying liquids from the pan
make sure that they don't flow out of the drainage spout. Wait until the liquid drops below
the drainage spout before continuing.
- To lower the pan simultaneously press the blue buttons (arrow pointing down) until the pan
automatically stops in the horizontal position.
CAUTION!! When moving the pan or during emptying make sure that:
1) The cover has been raised;
2) The water feed spout has been rotated outwards from the pan;
3) A container of suitable dimensions and in heat resistant material is available to transfer the
contents of the pan;
4) A regular movement is used to avoid possible overflow;
5) You don't lean on the pan during movement to avoid getting crushed between the upper
edge of the pan framework and the pan itself;
6) Always stand to one side of the appliance when manoeuvring to make sure you don't get
hit by jets or splashes from the pan;
7) In case of danger, release the handwheel or buttons and move to a safe distance from the
appliance.
3.5 WATER SUPPLY
The tank of the pan can be filled using the swivelling faucet which is fitted on several models.
It consists of a swivelling spout and a stop tap that is situated on the front panel of the
appliance.
With the pan in a horizontal position turn the faucet to the inside of the pan and turn the tap
on using the knob.
ATTENTION!!!
1) Do not fill the tank over its nominal level shown by the level mark on the inside of the pan
2) Do not allow the pan to overflow even during washing.
3) Do not open the tap when the pan is raised or if the spout is not turned to the inside of the
pan.
4) In case of lack of mains water supply, turn off the tap to avoid a flow of water when the
supply has been returned to normal.