Guarantee - FLORABEST FKS 2200 B1 Originalbetriebsanleitung

GB
Turning over the bar (4) requires you to
move the tensioning screw (
other side of the bar. Unscrew the retain-
ing bolt attaching the bar to the tensioning
screw. Move the tensioning screw over
to the other side of the bar and screw the
retaining bolt back in.
With the oil nozzles in good condi-
tion and the oil regulator set cor-
rectly, the saw chain will spray a
little oil off after starting.

Guarantee

This unit has a guarantee period of 36
months, or 12 months for units used on a
commercial basis or for replacement units
according to the statutory regulations.
Damages, which can be attributed to
natural wear, overloading or inappropriate
use, are excluded from the guarantee.
Certain component parts are subject to a
normal wear and are excluded from the
guarantee. In particular, these include:
Saw chain, chain bar, sprocket chain
wheel and carbon brushes, provided that
the complaints cannot be attributed to
flaws in the materials themselves. Also,
all damage to the machine, the saw chain
and the chain bar, which can be attributed
to inadequate lubrication, are excluded
from the guarantee.
Furthermore, a condition of the guarantee
services is that the maintenance intervals,
indicated in the operating instruction, have
been adhered to and the instructions on
the cleaning, care and maintenance have
been followed. Damages, which originate
due to material or manufacturer faults,
will be repaired free of charge by replace-
22
ment delivery or repair. This is conditional
22) to the on the saw being returned to the dealer
F
complete with purchase receipt and proof
of guarantee. Unqualified attempts at re-
pairing the unit or dismantling/opening the
motor casing result in loss of guarantee.
This is conditional upon the device being
returned in one piece complete with proof
of purchase and guarantee to our service
centre (see address on p. 141).
Our Service-Center will also carry out any
non-guarantee repair work for a charge.
We will be happy to give you a quote.
We will only work on units that have been
sent in with the appropriate packaging,
postage paid.
You can avoid paying extra for bulk post-
age or increased shipping costs by dis-
mantling the bar and chain, and packing
them together with the motor block in the
rear part of the original box. Cut off the
thinner front part, making sure that the
box keeps its rectangular form, and care-
fully seal up the box on this side.
The sender carries the costs of postage
and packing.
Caution: Please, in no case, send defec-
tive devices with filled oil tank. Completely
empty the tank. Possible material dam-
ages (oil runs out if device is placed on its
side or upside down!) and/or fire damages
during transport are borne at the expense
of the sender.
Devices sent in with freight collect - by
bulk freight, express or with other spe-
cial freight - are not accepted.
If you have a justified guarantee claim,
please contact our service centre by tele-
phone, which will then advise you on how
the claim will be processed.
We will dispose of tools free of charge.