Care And Cleaning; Technical Service - MO-EL BLACKLIGHT series Gebrauch Und Wartung

All users should be made aware of all aspects of operation and
safety and these instructions should be retained for reference.
Make certain that the rays of the heater are aimed at the area to heat.
If necessary, change the slanting angle by loosening the side screws
(fig. 3 - pos. A) and choose the fixing slot wanted (fig. 3 - pos. B).
Tighten the screws when you have finished.
Do not use the heater directly near a bathtub, a shower, a swimming
pool. In unoccupied premises it is recommended that the heating
system is switched off and isolated from the electrical supply.
Wait 15-20 minutes after power to reach the maximum tempera-
ture.

5. CARE AND CLEANING

Before cleaning, be sure the appliance is disconnected from the
power supply and allowed to cool. Never immerse the appliance in
water or any other liquid.
To clean, use a soft damp cloth and then dry thoroughly. Make sure
all parts are dry before using again.
Avoid the use of harsh detergents, solvents, and abrasive or aerosol
cleaners as they may damage surfaces.

6. TECHNICAL SERVICE

If you have any question relevant your appliance, call the local author-
ized distributor or the nearest Service Centre. Every repairs should
be carried on by an authorized Service Centre and also ask always for
original spare parts.
12