MO-EL BLACKLIGHT series Gebrauch Und Wartung Seite 11

1. Drill four holes in the wall following the dimensions in the table
below:
Distance
between the
fixing holes
(mm)
2. Fix the two brackets with the big holes (fig. 2 - pos. A) to the wall
using plugs of an appropriate size. Warning: make sure that the
slots arranged in the shape of an arch (fig. 2 - pos. B) are at the
bottom.
3. Fix the two brackets with the small holes (fig. 2 - pos. C) at the
back of the appliance using the screws supplied.
4. Join the two previously fixed brackets together with the bolt (fig.
3 - pos. A). Adjust the slanting angle of the appliance, putting the
screws in both sides as shown in figure 3 - pos. B.
Mo-El supplies on demand three optional brackets, shown in figure
4:
Twin (cod. 007701)
•
End to end (cod. 007702)
•
Extension (cod. 007703)
•
4. USE
The Blacklight range includes appliances with wattages ranging be-
tween 1500 W and 3200 W, suitable for heating private homes as
well as public premises (restaurants, pubs).
The appliances can be used indoors and outdoors (patios, verandas,
balconies).
The heating element of this product is hygroscopic. To avoid risk of
failures it is necessary to operate the unit for a few hours every 6
months.
This heating appliance does not feature a device to control ambient
temperature. Do not use it in small rooms used by people who are
unable to leave such rooms on their own unless they are under
constant surveillance.
7715
800
110
110
7718 7724
950
110
11
7732
1224 1624
110