Cleaning And Care - Klarstein Eiszeit Crush Handbuch

EN
24

CLEANING AND CARE

• Clean the inside, ice collector, water container, ice shovel and evaporator of the
appliance regularly. To clean, first unplug the appliance from the wall outlet and
remove the ice cubes. Use a vinegar solution diluted with water to clean the inside
and outside of the appliance. Do not spray chemicals or thinners, such as acids,
gasoline, or oil, into the interior of the appliance. Rinse the unit with water before
using it again.
• Make sure that the ventilation openings of the unit are not blocked. Do not use
mechanical equipment or other means not recommended by the manufacturer to
speed up the defrosting process.
• If the unit is not used again for a long time, the water pump may not be able to
pump sufficient water due to air in the water supply line. If this is the case, the
symbol for insufficient water is also displayed. To correct this, press the start button.
The appliance will then function as usual.
• To ensure the purity of the ice cubes, the water should be changed every 24 hours.
• If the appliance does not work due to water shortage, too much ice, no electricity,
etc., Turn the appliance off, wait for three minutes and then restart the appliance.
• Always use fresh water to make ice cubes. This applies to the initial installation as
well as if you use the appliance again after a long time.
• This appliance is designed for household use only. The appliance is not designed
for outdoor use. However, if it is to be used outdoors, make sure that the viewing
window is closed.