Klarstein Eiszeit Crush Handbuch Seite 22

EN
22
Step 3
Press the ON/OFF button to turn on/off the unit.
Step 4
The water is automatically returned to the water tank from the drip tray.
Step 5
Use the SMALL/LARGE buttons to select the desired ice cube size.
Note: If the temperature is less than 15°C, SMALL size selection is recommended; if the
temperature is more than 30°C, LARGE size selection is recommended.
Step 6
At the beginning of the ice cube making cycle, the ice is frozen on the evaporator
fingers.
Note: The duration of the ice cube production depends on the ambient temperature.
Step 7
Once the ice cube making cycle is complete, the drip tray tilts forward. The remaining
water is returned to the water tank and the ice cubes fall off the evaporator fingers.
Step 8
Within seconds, the drip tray tilts downwards and the ice produced in the previous cycle
is pressed into the container. The machine repeats steps 4 - 6.
Step 9
Press the ice cube output button to obtain ice cubes. The corresponding icon will light up
on the screen.
Note: Place your glass directly under the ice cube dispenser as it will fall out directly.
If the ice cubes have been stored in the container for a long time, they may freeze
and stick together, preventing the ice cubes from falling out. If this is the case, use the
supplied ice bucket to separate the ice cubes before pressing the button.
Step 10
If you press the Crushed Ice output button, the device outputs Crushed Ice.
Step 11
Press the ON/OFF button to turn off the unit.