Cleaning and care
DANGER –
RISK OF ELECTRICAL SHOCK!
►
Before cleaning the appliance, disconnect
the power plug from the mains power socket!
There is a risk of electric shock!
NEVER immerse the base 5 in water or
other fluids!
■
It is best to clean the appliance directly after
use . This makes food residues easier to remove .
CAUTION! MATERIAL DAMAGE!
►
Do not use abrasive or aggressive cleaning
materials . These can damage the surface of
the appliance!
■
Wipe the base 5 with a damp cloth . For stub-
born soiling use a mild detergent on the cloth .
Wipe off any detergent residue using a cloth
moistened with clean water .
■
Clean the blender jug 1/9, the blade holder 4
with blade 3, and the lid 2/8 in warm water
with a little mild detergent . Afterwards, rinse
all parts with clean water so that no detergent
residues remain .
SSME 250 A2
NOTE
If you clean the appliance directly after use, you
can usually achieve sufficiently hygienic cleaning
results for the blender jug 1/9 and the blade
holder 4 by using the following alternatives:
►
Large blender jug 1: Fill the large blender
jug 1 with about 500 ml of water and add
a few drops of mild detergent .
Small blender jug 9: Fill the small blender
jug 9 with about 200 ml of water and add
a few drops of mild detergent .
►
Attach the blade holder 4 and screw both
onto the base 5 .
►
Activate the "Pulse" function a few times so
that the blade 3 churns through the water .
►
Afterwards, rinse the blender jug 1/9 and
the blade holder 4 with plenty of clear
water to remove all detergent residues .
■
After cleaning, dry all parts thoroughly .
NOTE
You can also clean the lid 2 / 8 , the
blender jug 1 / 9 and the blade holder
4 in your dishwasher . If possible, place
the parts in the upper basket and ensure that
none of the parts can get stuck . Otherwise they
might deform .
Storage
■
Store the cleaned appliance in a clean, dust-free
and dry place .
■
You can coil up the cable and fasten it using the
supplied cable clip 7 .
GB │ MT
│
37
■