Vitek VT-4214 R Betriebsanweisung Seite 6

ENGLISH
Cooking programs and duration
Program
Rice
Boiling/Steam
cooking
Multicook
Temperature:
35°С – 150°С
Default: 130°С
Roasting
Heating
Soup
Baking
Stew
Porridge
Yogurt
Note:
–
Do not open the lid (5) before «Baking» program ending.
–
To avoid scorching of product, switch the keep warm function off after the end of «Baking» program. To do this
press the button (18) «STOP/Keep warm».
–
In «Roasting» program the unit operates similarly to a kitchen stove. Watch the cooking process and readiness
of food. Switch the multicooker off when the food is ready.
–
See recipes of dishes in the recipe book (supplied with the unit). All recipes are non-regulatory as the
amount and proportions of the ingredients may vary depending on local peculiarities of the food and
altitude above sea level.
«MULTICOOK» Button (16)
The «Multicook» program allows the user to set the tem-
perature and cooking duration independently.
– Press the button (16) to quickly switch to the «Mul-
ticook» program.
– Use the button (13) «+» or (14) «-» to set the desired
temperature within the range from 35°С to 150°С.
– Press the button (20) «TIME», then set the cooking
duration as described in chapter «Use of the multi-
cooker» (paragraph 8-9).
«Start» Button (17)
Press the button (17) to start the selected cooking
program.
«STOP/Keep warm» button (18)
Switching off / canceling wrong program settings
Use the button (18) to cancel wrong settings of cooking
or to switch the cooking program/keep warm mode off.
Temperature maintaining
When cooking is finished, you will hear 5 sound signals
and the unit will automatically switch to keep warm
mode. The indicator
and keep warm time will be shown (in hours).
Duration (in Default (hours)
hours)
0:15- 0:40 0:25
0:05 – 1:00 0:20
0:10 – 6:00 0:15
- -
0:10 – 0:40 0:20
0:30 – 3:00 0:50
0:25 – 2:00 0:50
0:20 – 1:00 0:50
0:40 – 3:00 0:50
0:10 – 10:00 6:00
will appear on the display
Delayed
start
+
+
+
-
-
+
-
+
+
+
To force the unit to switch from the standby mode to the
keep warm mode, press the button (18).
To switch the keep warm function off press the
button (18) again.
Note:
–
Do not use the keep warm function to heat up cold
products.
–
To avoid scorching products switch the keep warm
function off after «Baking» program.
«TIME» Button (20)
After selecting the cooking program press the button
(20) to switch to cooking duration setting. Use the but-
ton «TIME» to switch to current time setting.
«+» (13) and «-» (14) buttons
Pressing or holding the buttons (13) «+» and (14) «-» set
current time, cooking duration and heating temperature
(only for «Multicook» program) and set the delayed start
function.
«DELAYED START» button (19)
You can set the cooking end time. This function is not
available for «Baking», «Roasting» and «Reheat» pro-
grams.
6
Temperature
maintaining
+
+
+
(if
temperature
is set above
70° С)
+
+
+
+
+
+
-