Installation of the VERSO CLIQ
cylinder
Installing the profile c ylinder
Prerequisite: The mortise lock must be completely installed.
Observe the installation instructions with figures ("Figures", page 58).
An optional change of the cam position is possible with profile cylinders
("Optional: Changing the position of the locking cam", page 59).
1 Insert the profile cylinder into the profile cylinder cutout.
2 Fix the profile cylinder in place with the fixing screw.
The supplied fixing screw is suitable for locks with a backset up to
50 mm. For locks with a larger backset applies:
Length of fixing screw = backset size + 10 mm.
3 Only hand-tighten the cylinder fixing screw.
4 Test the locking cylinder for correct function and ease of movement.
For this purpose, actuate the locking cylinder several times with the
appropriate key.
You have installed the profile cylinder.
24
EN
®
mechatronic locking
Installation