4.6 REAR SHOCK ABSORBER ADJUSTMENT
•
The rear shock absorbers can be adjusted on the preloading of the spring, through which it is possible to adapt the scooter roadability according to
the load, the driving and the type of road.
•
The adjustment is carried out using the special spanner on the ring (A – fig. 26). If you turn it clockwise, the spring power will be increased.
Note: there are three adjustment positions:
1) 'STD' – rider only – minimum load – uneven roads – etc...
2) 'Average' – Variable load – Various kind of roads – etc...
3) 'Hard' – With a passenger – Maximum loads – etc...
IMPORTANT: adjust both shock absorbers according to the same adjustment index. An unbalanced adjustment may jeopardize
the vehicle stability.
1
Fig. 26
3
2
A
EN
29