Miscellaneous Settings; Factory Reset - Makita DMR115 Bedienungsanleitung

MISCELLANEOUS SETTINGS

Automatically updating the clock
You may specify that the radio sets its clock from DAB
or FM radio broadcasts. After a power failure, the radio
will then set its clock in the next time that you turn on
the radio in DAB or FM mode.
1. With your radio switched on, press the Advanced
setting button to access the menu for the current
mode.
2. Rotate the Tuning control knob to select "Time/Date".
Press the Tuning control knob to enter the setting.
3. Rotate the Tuning control knob to select "Auto
Update". Press the Tuning control knob to enter the
auto-update menu.
4. Rotate the Tuning control knob to choose an update
option from "from Any", "from DAB" or "from FM" as
required. Press the Tuning control knob to confirm
your choice. The current setting will be marked with a
tick.
Setting the clock format
1. With your radio switched on, press the Advanced
setting button to access the menu for the current
mode.
2. Rotate the Tuning control knob to select "Time/Date".
Press the Tuning control knob to enter the setting.
3. Rotate the Tuning control knob to select "Set 12/24
Hour". Press the Tuning control knob to enter the
clock format setting. The current clock display format
is marked with a tick.
4. Rotate the Tuning control knob to select 12 or 24
hour format. Press the Tuning control knob to confirm
your setting. If the 12 hour clock format is chosen, the
radio will display a 12 hour clock with an AM or PM
indicator.
Setting the date format
1. With your radio switched on, press the Advanced
setting button to access the menu for the current
mode.
2. Rotate the Tuning control knob to select "Time/Date".
Press the Tuning control knob to enter the setting.
3. Rotate the Tuning control knob to select "Set Date
Format". Press the Tuning control knob to enter the
setting.
4. Rotate the Tuning control knob to select "DD-MM-
YYYY" or "MM-DD-YYYY" date format. Press the
Tuning control knob to confirm the setting.
Loudness
You can get compensation on lower and higher
frequency for your radio by adjusting the loudness
function.
1. With your radio switched on, press the Advanced
setting button to access the menu for the current
mode.
2. Rotate the Tuning control knob to select "Loudness".
Press the Tuning control knob to enter the setting.
3. Rotate the Tuning control knob to select "On" to turn
on the loudness function. To turn off the loudness
function, select "Off". Press the Tuning control knob
to confirm the setting.
Language options
There are eight language options available in the
radio: English, German, Italian, French, Dutch, Danish,
Norwegian and Polish.
1. With your radio switched on, press the Advanced
setting button to access the menu for the current
mode.
2. Rotate the Tuning control knob to select "Language".
Press the Tuning control knob to enter the setting.
3. Rotate the Tuning control knob to choose your
desired language. Press the Tuning control knob to
confirm your setting.

Factory reset

If you wish to completely reset your radio to its initial
state this may be performed by following this procedure.
By performing a factory reset, all user entered settings
will be erased.
1. With your radio switched on, press the Advanced
setting button to access the menu for the current
mode.
2. Rotate the Tuning control knob to select "Factory
Reset". Press the Tuning control knob to enter the
setting.
3. Rotate the Tuning control knob to select "Yes" or
"No". If you do not wish to carry out a system reset,
select "No" and then press the Tuning control knob
to confirm the setting. With "Yes" selected, press the
Tuning control knob. A full reset will be performed.
The station list and presets will be erased. All settings
will be set to their default values.
In case of malfunction due to electrostatic discharge,
reset the product (reconnection of power source may be
required) to resume normal operation.
Micro USB port for software upgrade
Software updates for your radio may be available in the
future.
As software updates become available software and
information on how to update your radio can be found at
Makita website.
1. Using the micro USB cable (not supplied) to connect
the USB socket in the battery compartment and your
PC.
11 ENGLISH