Miscellaneous Settings; Brightness Control - Makita MR003G Betriebsanleitung

unit from an external audio device such as a MP3 or CD
player.
1. Press the Power button to switch on your radio.
2. Connect an external audio source (for example, MP3
or CD player) to the AUX IN socket. The radio will
automatically switch to the AUX IN mode.
3. Alternatively press the Band button until "AUX IN" is
displayed.
4. To have the better sound quality, we recommend
setting the volume to more than two-thirds level on your
audio device and then adjust the volume on the radio
as required.
Note:
Audio cord is not included as standard accessories.

MISCELLANEOUS SETTINGS

Language options
There are eight language options available in the
radio: English, German, Italian, French, Dutch, Danish,
Norwegian and Polish.
1. Press Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"Language" shows on the display. Press the Volume/
Tuning Control/Select knob to enter the setting.
3. Rotate the Volume/Tuning Control/Select knob to
choose your desired language. Press the Volume/
Tuning Control/Select knob to confirm your setting.

Brightness control

The backlight of the display can be adjusted.
1. Press the Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until the
"Backlight" shows on the display. Press the Volume/
Tuning Control/Select knob to enter the setting.
3. Rotate the Volume/Tuning Control/Select knob to
choose "On" or "Off" to enable or disable the backlight
function, then press the Volume/Tuning Control/Select
knob to confirm the setting.
System reset
If your radio fails to work correctly, or some digits on the
display are missing or incomplete, carry out the following
procedure.
1. Press Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"Factory Reset" shows on the display. Press the
Volume/Tuning Control/Select knob to enter the setting.
3. Rotate the Volume/Tuning Control/Select knob to choose
"Yes". Press the Volume/Tuning Control/Select knob to
confirm the setting and a full reset will be performed.
Software version
1. Press the Advanced setting button.
2. Rotate the Volume/Tuning Control/Select knob until
"SW Version" shows on the display. Press the Volume/
Tuning Control/Select knob to view the software version
installed in the radio.
Micro USB port for software upgrade
Software updates for your radio may be available in the
future.
As software updates become available software and
information on how to update your radio can be found at
Makita website.
MAINTENANCE
CAUTION:
● Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
● Do not wash the radio with water.
SPECIFICATIONS
Power requirements
AC power adaptor
Battery
Frequency coverage
DAB/DAB+ Channel
block
Compatible standard
Circuit feature
Loudspeaker
Output power
Input terminal
Antenna system
Dimensions (L x W x H) 278 x 170 x 298 mm
Weight
11 ENGLISH
DC 12V 1A, center pin positive
Slide battery: 10.8V - 36V
FM 87.50-108MHz
(0.05MHz/step)
DAB/DAB+
174.928-239.200 MHz
DAB (Band III) 5A-13F
DAB/DAB+
3.5 inches 32 ohm x 2
10.8V-12V max: 1.7W x 2
14.4V: 3W x 2
18V: 4.9W x 2
36V: 4.9W x 2
3.5mm dia. (AUX IN)
DAB/FM: Built-in antenna
4.2Kg
(without battery)