Presetting Stations In Am/Fm Mode; Miscellaneous Settings - Makita MR002G Betriebsanleitung

● The volume should not be too large. To prevent
possible hearing damage, do not listen at high
volume levels for long periods.
8. To switch off your radio press the Power button.
Manual tuning – AM/FM
1. Press the Power button to switch on your radio.
2. Press the Band button to select AM or FM radio
mode.
3. Press the Tuning control knob and you will see the
FM or AM is flashing on the display.
Note:
● FM/AM will flash approx. 10 seconds. Within this
period, only manual tuning is allowed.
● If volume adjustment is desired while FM/AM is
flashing, press the Tuning control knob to stop the
flash and you can rotate the Tuning control knob to
adjust sound level.
4. Rotate the Tuning control knob to tune to a station.
5. When the end of the waveband is reached your radio
will recommence tuning from the opposite end of the
waveband.
6. Rotate the Tuning control knob to adjust the sound
level as required.

Presetting stations in AM/FM mode

There are 5 preset stations each for AM and FM radio.
They are used in the same way for each waveband.
1. Press the Power button to switch on your radio.
2. Press the Band button to select the desired
waveband. Tune to the required radio station as
previously described.
3. Press and hold the required Preset button (1 to 5)
until the display shows "P4" for example after the
frequency. The station will be stored using the preset
number. Repeat this procedure for the remaining
presets as you wish.
4. Preset stations which have already been stored may
be overwritten by following the above procedure if
required.
Display modes – FM
Your radio has a range of display options for FM radio
mode.
Repeatedly press the Menu/Info button to view the RDS
information of the station you are listening to.
a. Station name
b. Program type
c. Radio text
d. Year/Day
Displays the name of the station
being listened to.
Displays the type of station being
listened to such as Pop, Classic,
News, etc.
Displays radio text message
such as new items etc.
Displays the year and day of
e. Date/Day
f. Frequency
FM stereo (auto)/mono
If the FM radio station being listened to has a weak
signal some hiss may be audible. It is possible to reduce
this hiss by forcing the radio to play the station in mono
rather than stereo.
1. Press the Band button as needed to select the FM
band and tune to the desired FM station as previously
stated.
2. Press and hold Menu/Info button to enter the menu
setting.
3. Rotate the Tuning control knob until the "FM AUTO (or
MONO)" setting shows on the display. If the setting is
Auto, press the Tuning control knob and then rotate
the Tuning control knob to switch to Mono mode to
reduce the hiss. Press the Tuning control knob to
select the option.
Recalling a preset in AM/FM mode
1. Press the Power button to switch on your radio.
2. Press the Band button to select AM or FM radio
mode
3. Momentarily press the required Preset button to
tune to your radio to one of the stations stored in the
preset memory.

MISCELLANEOUS SETTINGS

Setting the time and date format
The clock display used in stand-by mode and on the
playing mode screens can be set to different format.
The selected format is then also used when setting the
alarms.
1. Press and hold the Menu/Info button to enter the
menu setting.
2. Rotate the Tuning control knob until "CLOCK xxH"
appears on the display and press the Tuning control
knob to enter the setting. You will see the time format
begins to flash.
3. Rotate the Tuning control knob to select either 12
or 24 hour format. Press the Tuning control knob to
confirm your choice of clock format.
Note:
If the 12 hour clock format is chosen, the radio will
then use the 12 hour clock for the setting.
4. Press and hold the Menu/Info button to enter the
menu setting.
11 ENGLISH
the week according to the date
setting of your radio.
Displays the date and day of
the week according to the date
setting of your radio.
Displays the frequency of the FM
for the station listened to.