Miscellaneous Settings - Makita MR001G Betriebsanleitung

MISCELLANEOUS SETTINGS

Setting the clock
Clock can be set either when the radio is power on or
off.
1. Long press the Time set button for more than 2
seconds, the display will flash time set symbol and
the hour digit, followed by a beep.
2. Rotate the Tuning control knob to set the required hour.
3. Press the Tuning control knob to confirm hour setting,
the minute digit will flash.
4. Rotate Tuning control knob to set the required minute.
5. Press the Tuning control knob to complete clock setting.
Setting the radio alarm
When the radio alarm is selected, the radio will turn on
and play the chosen radio station at the chosen alarm
time. The radio alarm will continue for one hour unless
turned off by pressing the Power button. Pressing the
Power button whilst the alarm is activated will cancel the
alarm for 24 hours.
Note:
When the radio is in low battery status, the radio alarm
can't be activated.
a. Setting radio alarm time:
1. Ensure that the clock time is set correctly before
setting the alarms. The radio alarm can be set either
when radio is on or off.
2. Press the Radio alarm button, the radio alarm symbol
will flash.
3. During radio alarm symbol flashing, press and hold
Time set button for more than 2 seconds followed by
a beep. The hour digit will flash on the display.
4. Rotate the Tuning control knob to select the required
alarm hour then press the Tuning control knob to
confirm the setting. The minute digit will flash on the
display.
5. Rotate the Tuning control knob to select the required
alarm minute. Press Tuning control knob to complete
the alarm time setting.
b. Setting radio alarmed station
1. During setting radio alarm time and the radio alarm
symbol is flashing, press Band button to activate the
radio to select required wake-up band and station by
manual tuning or recall the preset stations. Rotate the
Tuning control knob to adjust the volume level. Press
the Time set button to complete radio alarm setting.
The display will show radio alarm symbol. When the
radio alarm is activated, the alarm will go off in the
Humane Waking System. It will increase its volume
from 0 to your set volume.
2. When above radio alarm time and station are set,
press and hold the Radio alarm button for 2 seconds
followed by a beep to switch alarm on or off. Display
will show radio alarm symbol when radio alarm is set.
Note:
● If new radio alarm station is not selected, it will select
the last alarm station.
● If the selected AM/FM alarm station is not available
when the alarm is sounding, the buzzer alarm will be
used instead.
Setting the HWS (Humane Waking
System) buzzer alarm
A beep tone will activate when selecting the HWS
buzzer alarm.
The alarm beep will sound shorter every 15 seconds
for one minute followed by one minute silence before
repeating the cycle.
The HWS alarm will sound for one hour until turning off
by pressing the Power button. Press the Power button
whilst the alarm is activated will cancel the alarm for 24
hours.
1. Ensure that the clock time is set correctly before
setting the alarms. The buzzer alarm can be set
either when the radio is on or off.
2. Press the Buzzer alarm button, the buzzer alarm
symbol will flash.
3. During the buzzer alarm symbol flashes, press and
hold the Time set button for more than 2 seconds
followed by a beep and the hour digit will flash on the
display.
4. Rotate the Tuning control knob to select the required
alarm hour then press the Tuning control knob to
confirm the setting. The minute digit will flash on the
display.
5. Rotate the Tuning control knob to select the required
alarm minute. Press Tuning control knob to complete
the buzzer alarm setting.
6. Press and hold the Buzzer alarm button for more than
2 seconds followed by a beep to switch on or off the
HWS buzzer alarm. Display will appear the buzzer
alarm symbol when buzzer alarm has been set.
Snooze
1. Whilst the alarm is activated, pressing any buttons
except the Power button will activate the snooze
function. The radio or HWS buzzer alarm will be
silenced with interval of 5 minutes.
2. The display will flash both the snooze symbol and the
alarm symbol. The snooze function can be repeatedly
during one hour that the alarms are active.
Sleep timer
The sleep timer will automatically switch off the radio
after a preset time has elapsed.
10 ENGLISH