Fronius Acctiva 12-20 Bedienungsanleitung Seite 31

Wall mounting and minimum clearances
Mounting on the
wall
Charger with optional wall bracket (DIN rail
TS 35, EN 50022)
Important! Observe minimum clearances for ventilation purposes. Ensure an adequate
supply of fresh air.
Floor installation
option
(1)
Fig. 3 Floor installation option
The option for protection against undesired starting can be used to control safety de-
Option for pro-
vices that carry out a specific action if the charger is switched on.
tection against
undesired star-
ting e.g.: a relay prevents a vehicle from starting while its battery is being charged.
Important! The option "Protection against undesired starting - 2-pin with change-over
contact" MUST NOT be operated on two different circuits.
2
1
3
5
4
NOTE! If fixing to the wall, please note the weight of the charger. The bracket
must be fitted to a suitable wall using the correct dowels and screws.
(2)
(3)
(4)
WARNING! Risk of injury and damage from exposed, rotating vehicle parts.
When working in the vehicle's engine compartment, take care that hands,
hair, items of clothing and charger leads do not come into contact with moving
parts, e.g. fan belt, fan, etc.
3
> 3
0 m
m
5
Minimum clearances
(1) Foot
(2) Catches
(3) Shims
(4) Screw 2.9 x 13
(1)
> 1
5 m
m
> 3
0 m
m
> 1
5 m
m