Eliwell Coldface EWRC300LX Bedienungsanleitung Seite 11

ISO14001
Eliwell has held ISO 14000 certification for a number of years, thereby guaranteeing the
effective application of its Environmental Management Policy.
Eliwell is a member of the Italian Electrical Engineering Association (Comitato
Elettrotecnico Italiano) and makes an active contribution to regulatory development.
This ensures that Eliwell technical developers benefit from excellent training in the
fields of:
• electrical safety
• electromagnetic compatibility
• respect for the environment
Eliwell wishes to share its commitment to environmental sustainability with its
customers, by reducing its paper trail and providing online access to documentation.
For further information, refer to the complete user manual which can be downloaded
free of charge from the www.eliwell.it website.
CONDITIONS OF USE - Permitted use
For safety reasons, the device must be installed and used according to the instructions provided.
In particular, parts carrying dangerous voltages must not be accessible in normal conditions.
The device must be adequately protected from water and dust with regard to the application, and
must only be accessible using tools (with the exception of the front panel).
The device is suitable for use as a stand-alone unit and has been tested for safety aspects in
accordance with harmonised European reference standards. It is rated:
• in terms of design, as an automatic electronic temperature controller for built-in or stand-alone
installation
• in terms of automatic operating characteristics, as a type 1B controller
• in terms of software class and structure, as a class A device
• In terms of connection, as a device with flexible, external and removable cable with Y connection.
• device with pollution grade 2
• as a device with class D fire resistance
• overvoltage category grade II
• device made with class IIIa material
• ball test temperature: 80°C
Improper use
Any use other than that expressly permitted is prohibited.
Note that the relay contacts provided are of a functional type and subject to failure: any protection
devices required by product standards, or suggested by common sense for obvious safety
requirements, must be installed externally to the instrument.
LIABILITY AND RESIDUAL RISKS
Eliwell Controls srl declines any liability for damage due to:
• installation/uses other than those expressly specified and, in particular, failure to comply with the
safety requirements of established standards and/or instructions specified in this document
• use on panels that do not provide adequate protection against electric shocks, water or dust when
assembled
• use on panels allowing access to dangerous parts without having to use tools
• tampering with and/or modification of the product
• installation/use on panels which are not compliant with current standards and regulations
DISCLAIMER
This document is the exclusive property of Eliwell and cannot be reproduced or circulated unless
expressly authorised by Eliwell. Every care has been taken in preparing this document; nevertheless
Eliwell declines any liability due to its use. The same applies to any person or company involved
in the creation and preparation of this document. Eliwell reserves the right to make aesthetic or
functional changes at any time without notice.
11 - EN EWRC300/500LX