Technical Information; Electrical Connection; Technical Data - Indesit H562 IX Betriebsanleitung

Technical information

Electrical connection

GB
! Arrange the electrical power supply within the
decorative flue dimensions.
! When making the electrical connections, check that
the voltage values correspond to those indicated on
the data plate inside the appliance itself.
! In case your appliance is not furnished with a non
separating flexible cable and has no plug, or has not
got any other device ensuring omnipolar
disconnection from the electricity main, with a
contact opening distance of at least 3 mm, such
separating device ensuring disconnection from the
main must be included in the fixed installation.
! If your unit features a power lead and plug, position
this so the plug is accessible.
! The following warning is valid in the United Kingdom
only (in case your cable is not furnished with a
plug). As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals in your
plug, proceed as follows: – the wire which is
coloured blue must be connected to the terminal

Technical data

Model
Dimensions
Gross weight
Absorption
Flow rate
Grease filter
Suction
surface area
12
H562IX / H562WH / H562 BK
width 59.8 cm
height 79 /112 cm
depth 50.7 cm
Outlet pipe diameter 15 cm
12.7 Kg
Total 330 W
Motor 1x250 W
Lamps 2x40 W
770 m /h
3
1487 cm
2
which is marked with the letter N or coloured black;
– the wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.
– terminal of a three-pin plug.
H572IX
width 69.8 cm
height 79 /112 cm
depth 50.7 cm
Outlet pipe diameter 15 cm
14 Kg
Total 330 W
Motor 1x250 W
Lamps 2x40 W
770 m /h
3
1487 cm
2
H592IX
width 89.8 cm
height 79 /112 cm
depth 50.7 cm
Outlet pipe diameter 15 cm
16 Kg
Total 330 W
Motor 1x250 W
Lamps 2x40 W
770 m /h
3
2287 cm
2