Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Data - Indesit HIP 6 IX Betriebsanleitung

Vorschau ausblenden Andere Handbücher für HIP 6 IX:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 14
Replacing the charcoal filter (P)
(for filtering version only)
WHEN TO REPLACE IT:
replace it at least every 6
months.
HOW TO REMOVE IT: push
the catch inwards and remove
the charcoal filter from its seat.
Replacing the lamps
-
Remove the grease filters
-
Exercise slight pressure on
the mobile part of the 2
catches.
-
Remove the light fitting
from the outside.
-
Unscrew the lamp.
-
Replace it with a lamp of
the same type.
-
Refit the light fitting by
pushing it into place from
the outside.
- To change the halogen
lamps open the cover
levering from the proper
slots. Replace it with a lamp
of the same type.
DISPOSAL
!
Do not dispose of the hood with the normal household waste
(European Directive 2002/96/EC on Waste Electrical and
Electronic Equipment (WEEE).
!
Disused hoods must be collected separately to optimise the
rate of recovery and recycling of the constituent components
and to prevent potential harm to health and the environment.
!
The crossed-out bin symbol indicates the obligation of
separate collection.
!
For proper disposal of electrical appliances, contact the
specific public service or the dealers.
MALFUNCTIONS
If something appears not to be working properly, do the following
simple checks before calling Technical Service:
If the hood is not working:
Check that:
-
The power has not been disconnected.
-
A speed has been selected.
If the hood performs inefficiently:
Check that:
-
The motor speed selected is sufficient for the amount of
smoke and vapours released.
-
The kitchen is sufficiently ventilated to allow air intake.
-
The charcoal filter is not worn (hood in filtering version).
If the hood has turned off during normal functioning:
Check that:
-
The power has not been disconnected.
-
the omnipolar disconnection device has not tripped.

TECHNICAL DATA

Height 68/119 cm
Depth 49 cm
exhaust pipe Ø 15 cm
Model HIP 6 IX / HIP 6 F IX
Width 59.8 cm
Gross weight: 16.8 kg
Total absorption 215 W
Motor absorption 1x135 W
Lamp absorption 2x40 W
Model HIP 9 IX / HIP 9 F IX / HIP 97 IX
Width 89.8 cm
Gross weight: 17.9 kg
Total absorption 215 W
Motor absorption 1x135 W
Lamp absorption 2x40 W
Model HIP 6 P IX / HIP 67 P IX
Width 59.8 cm
Gross weight: 17.8 kg
Total absorption 270 W
Motor absorption 1x190 W
Lamp absorption 2x40 W
Model HIP 6 P IX AUS
Width 59.8 cm
Gross weight: 17.8 kg
Total absorption 230 W
Motor absorption 1x190 W
Lamp absorption 2x20 W
Model HIP 9 P IX
Width 89.8 cm
Gross weight: 18.9 kg
Total absorption 270 W
Motor absorption 1x190 W
Lamp absorption 2x40 W
Model HIP 9 P IX AUS
Width 89.8 cm
Gross weight: 18.9 kg
Total absorption 230 W
Motor absorption 1x190 W
Lamp absorption 2x20 W
Components not provided with the product
13

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hip 9 ixHip 6 f ixHip 9 f ixHip 6 p ixHip 9 p ixHip 6 p ix aus ... Alle anzeigen

Inhaltsverzeichnis