Introduction; Proper Use; Features And Equipment - Parkside PEBS 900 Bedienungs- Und Sicherheitshinweise

Introduction

The following icons / symbols are used in this instruction manual:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Dangerous electric current – danger
to life!
Explosive material!
n
Rated idle running speed
0
V ~
Voltage
W
Watts (Effective power)
Belt sander PEBS 900
Introduction
Q
Please make sure you familiarise your-
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow-
er tools correctly. To help you do this please read
the accompanying operating instructions.
Keep these instructions in a safe place. If you pass
the device on to anyone else, please ensure that
you also pass on all the documentation.

Proper use

Q
The belt sander is designed for dry sanding of
large surfaces of wood, plastic, metal, plaster and
painted surfaces. The device may only be used for
dry sanding. Always use a sanding belt and grade
of grit suitable for the particular surface you are
sanding. The speed selected should also be appro-
6 GB/IE/CY
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children and other unauthorised
personnel at a safe distance when
using electrical tools.
Keep the device away from rain or
moisture. Water entering an electrical
device increases the risk of electric shock.
Damaged appliances, power cables
and power plugs mean potentially fatal
risks from electric shock. Regularly
check the condition of the appliance,
the power cables and the power plugs.
Dispose packaging and appliance in
an environmentally-friendly way!
priate for the material. The device is not intended
for commercial use. Any other use or modification
to the device shall be considered as improper use
and could give rise to considerable dangers. The
manufacturer will not accept liability for loss or
damage arising from improper use.

Features and equipment

Q
Belt speed adjuster wheel
1
Locking knob
2
ON / OFF switch
3
Toothed belt cover
4
Dust extraction spout
5
Belt adjuster screw
6
Auxiliary handle
7
Ventilation slots
8
Tensioning lever
9
Dust collection box
10
Extraction adapter
11