Auto Power Off; Factory Reset; Bluetooth; Wi-Fi - RIDGID micro CA-330 Betriebsanleitung

micro CA-330 Inspection Camera

Auto Power OFF

Select the Auto Power OFF icon and press se-
lect . Select disable to turn OFF the auto -
ma tic shut down function. Select the 5 Minutes,
15 Minutes or 60 Minutes to turn OFF the
tool upon 5/15/60 minutes of non-operation.
Automatic shut down setting will not be acti-
vated when recording or playing video.

Factory Reset

Select the Reset icon and press Select
Confirm the reset function by selecting Yes
and press Select
tool to the factory default settings.

Bluetooth

®
Select ON or OFF to enable or disable Blue -
tooth. Select SEARCH and press Select
search for Bluetooth compatible microphones.

Wi-Fi

Select ON or OFF to enable or disable Wi-Fi
broadcast.

About

Select the About function to display the firm -
ware revision of the micro CA-330 as well as
the software copyright information.

Transferring Files

Computer with USB
With the unit powered ON, connect the micro
CA-330 to a computer using the USB cable.
The USB connected screen is displayed on the
micro CA-330. The internal memory and SD™
card (if applicable) will appear as separate
drives on the computer and are now accessi-
ble as a standard USB storage device. The
copy and delete options are available from
computer operation.
Computer by Wi-Fi
Verify in the CA-330 settings menu that WiFi
broadcast is turned ON. Using your computer,
search for and connect to the "CA-330" Wi-Fi
network. The CA-330 broadcasts an unse-
cured Wi-Fi network and no password is re-
quired. Please consult your computer instruc-
tion manual for details on how to connect to a
Wi-Fi network. Verify on your computer that it is
connected to the "CA-330" Wi-Fi network.
Now press the menu button
and select "Access files by Wi-Fi" mode to
12
again. This will reset the
on the CA-330
allow remote file access. If there is an SD
card installed, you will be prompted on the
CA-330 to select SD card or internal memory
for browsing. The CA-330 will now display a
screen indicating it is in "Access files by Wi-Fi"
mode.
From your computer open the default web
browser and type "http://192.168.2.103/dir/"
into the browser address bar. Your browser will
now display a directory listing of the CA-330
files. From here you may access images and
.
video from the CA-330 internal memory or
SD-Card. Please consult your internet browser
documentation for specific ways to download
and manipulate files.
Wi-Fi Connection to a Mobile Device
The CA-330 will allow file access and re-
to
mote 2nd screen viewing from a mobile de-
vice such as a tablet or smartphone running
iOS or Android
®
find links to download the RIDGIDview app at
www.RIDGID.com/CA-330.
Verify in the CA-330 settings menu that Wi-Fi
broadcast is turned ON. Using your mobile
device, search for and connect to the "CA-
330" Wi-Fi network. The CA-330 broadcasts an
unsecured Wi-Fi network and no password
is required. Please consult your mobile de-
vice instruction manual for details on how to
connect to a Wi-Fi network. Verify on your
mobile device that it is connected to the "CA-
330" Wi-Fi network.
Open the RIDGIDview application on your
mobile device. There is a help file within the
app that describes its features and use.
Do not allow use in wireless mode with a sep-
arate monitor to distract you from proper CA-
330 use. Distractions increase the risk of injury.

Connecting to TV

The micro CA-330 Inspection Camera can
be connected to a television or other monitor
for remote viewing or recording through the in-
cluded RCA cable.
Open the right side port cover (Figure 3) .
Insert the RCA cable into the TV-Out jack.
Insert the other end of the cable into the Video-
In jack on the television or monitor. Check to
make sure the video format (NTSC or PAL)
output is set properly. The television or mon-
itor may need to be set to the proper input to
allow viewing. Select the appropriate TV-Out
format using the menu.
operating systems. You can
®