Assembly Procedure - Panasonic TY-ST42PE6 Montageanweisungen

Assembly Procedure

1. Assemble the Pedestal
Use the appropriate bracket according to the size
of the display.
Fix the bracket
screws .
● Securely tighten the screws.
● While fixing the screws to the bracket, support
the bracket by hand to prevent it from falling.
(Tightening torque: 1.5 to 1.8 N•m)
2. Install the Display
Installation must be carried out by at least two
people.
(1) Align the arrow on the back of the product ( )
and the arrow on the base ( ) as shown in the
image on the right.
(2) Insert the base into the insertion opening on
the display till it stops.
(3) Lightly tighten the 4 assembly screws
to adjust the display so that it is level.
(4) Securely tighten the screws to fix.
(Tightening torque: 1.2 to 1.5 N•m)
16
to the base with the assembly
at first
Assembly screw
holes
Assembly screw
(4)
Bracket
Base
Insertion opening
Assembly screw
(4)