Inhaltsverzeichnis; Symbols Used In This Document; Applications; System Sizing - Grundfos JP Booster PM 2 Gebrauchs- Und Sicherheitsanweisung

English (GB) Safety instructions
Original safety instructions
CONTENTS
1. Symbols used in this document
2. Applications
3. System sizing
4. Electrical connection
5. Ejector valve
5.1 Ejector valve setting
6. Startup
6.1 Shaft seal run-in
7. Alarms
7.1 Dry running
7.2 Anti-cycling
7.3 Auto reset
8. Fault finding
9. Disposal
Warning
Prior to installation, read this document
and the quick guide. Installation and
operation must comply with local
regulations and accepted codes of good
practice.
Warning
The use of this product requires
experience with and knowledge of the
product.
Persons with reduced physical, sensory or
mental capabilities must not use this
product, unless they are under supervision
or have been instructed in the use of the
product by a person responsible for their
safety.
Children must not use or play with this
product.
4

1. Symbols used in this document

Warning
Page
If these safety instructions are not
observed, it may result in personal injury.
4
4
Warning
4
If these instructions are not observed, it
may lead to electric shock with consequent
5
risk of serious personal injury or death.
5
5
If these safety instructions are not
6
Caution observed, it may result in malfunction or
damage to the equipment.
6
6
Notes or instructions that make the job
6
Note
easier and ensure safe operation.
6
6

2. Applications

7
The JP Booster PM 2 is suitable for pressure
8
boosting of fresh water in domestic water supply
systems.

3. System sizing

Warning
The system in which the product is
incorporated must be designed for the
maximum pump pressure.
The default setting will cause the pump not
to stop until the flow has ceased.
Caution
The pump will start when the pressure in
the system has fallen.