Bluetooth Speaker Connecting; Window Display - AsViva T19 Benutzerhandbuch

COMPUTER INSTRUCTION

Bluetooth speaker connecting:

1.Starting method:
1) Check your mobile phone connection network ( Wi-Fi, 3G or 4G)
2) Turn on Mobile phone Bluetooth, Search Treadmill Bluetooth( Bluetooth Name: WZLJ) .
3) After Bluetooth is connected, you will hear „Bluetooth connected successfully" .
4) You can enjoy the Bluetooth speaker
2.Error starting method
1) After clicking Start, jump on the running belt that is sliding.
2) Stand on the running belt and turn on the treadmill.
3) Start treadmill running in quick mode.
4) Start running without a safety lock.
5) Treadmills for the minors,the disables or other who not suitable for strenuous exercisers.
I.Window display:
1."SPEED"-Window:
Display the current speed value in the running state. The speed display range is: 1.0-12.0KM/h.
When the countdown is started, „3", „2", and „1" are displayed.
2. „TIME"-Window:
Display the exercise time. The positive timing is from 0:00-99:59. When the time is 99:59, the treadmill
speed steady decrease until stops running. The countdown is reduced from the set time to zero. When
the countdown is 0:00, the treadmill speed steady decrease until stops running. and complete stop
after 10 minutes later enters the standby state.
3. „DIS"-Window:
Display the movement distance, the positive count is from 0.00-99.90, re-count after overflow, the re-
verse counting is decremented from the set value to zero, when the countdown reaches 0, the tread-
mill speed steady decrease until stops running. and complete stop after 10 minutes later enters the
standby state.
4. „CAL"-Window:
Display the calorie consumption value. When the calorie consumption value is displayed, the positive
count is from 0.0-999.0, re-count after overflow . When the count is reversed, it is counted from the set
value to 0. When the countdown reaches 0,the treadmill speed steady decrease until stops running.
and complete stop after 10 minutes later enters the standby state .
39