Getting Started; Powering The Headphones On/Off; Pairing The Headphones - Silvercrest SBTH 4.1 A1 Bedienungsanleitung Und Sicherheitshinweise

SilverCrest SBTH 4.1 A1

Getting started

Powering the headphones on/off

To power the headphones on, press and hold the ▸ll button (2) for approx. 4
seconds. The LED (8) flashes orange to indicate standby mode. If this is the first
time you power the headphones on and they were not paired with any device
before, pairing mode is started automatically. In pairing mode the LED (8)
flashes alternating blue and orange. Please read the next chapter to pair your
device.
To power the headphones off, press and hold the ▸ll button (2) for approx. 4
seconds. The LED (8) flashes orange multiple times while powering off.

Pairing the headphones

Proceed as follows to pair the headphones with your device.
 Power the headphones off.
 To start pairing mode, press and hold the
seconds.
 The LED (8) flashes alternating blue and orange. The headphones are now
in search mode. The search mode lets you connect a compatible Bluetooth
device to the headphones.
 Next establish a Bluetooth
player. Please also read the smartphone or media player User Manual. From
the list of found devices, select "SBTH 4.1 A1" and establish the connection.
If you are prompted for a PIN, enter "0000".
While connected, the LED (8) briefly flashes blue every 4 seconds. If you
power off your device or move out of range, the headphones will toggle to
standby mode (not connected) and the LED (8) flashes blue quickly.
If you want to connect a different device to your headphones, you have to
repeat pairing as described above.
72 - English
®
connection to a smartphone or audio/media
▸ll button (2) for approx. 6
®