Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4
5
6
3.
Assembly Instructions
N.W. 4 kg
G.W. 5 kg
For assembly, place the AB Flex on a stable and level base
1.
Attach the wheels
2.
Position the backrest (2) as in the picture above, then use the spanner (5) to attach the
wheels (3) to the axel on the backrest.
Attach the backrest to the cushion
3.
Align the fixed plate (6) with the holes on the cushion (1), then tighten the knobs (4).
Attach the pull rope
4.
Hook the pull rope up to the fixed plate.
Check each part, and do not use the machine if something is wrong.
5.
4. Instructions for Use
Maximum weight capacity: 100 kg
Note: if any of the adjustments devices are left projecting, they could interfere
with the user's movements.
No settings or adjustments can be applied to the machine other than those
described in the assembly instructions.
Ensure that there is at least 0.6 m of extra free space around the training area
in any direction from which the equipment can be accessed. The free space
must be sufficient to allow for an emergency dismount. Where Ab Flex
machines are positioned adjacent to one another, the free space may be
Knob
Spanner
Pull rope
piece
piece
set
2
2
3
Werbung
