Vitek VT-1502 BK Betriebsanweisung Seite 8

www.101kofemashina.ru - обзоры, отзывы, характеристики, инструкции, акции и цены
ENGLISH
Switch the coffee maker off by pressing the
5.
button (17) . Leave the coffee maker filled with
the solution for 15 minutes.
Repeat the steps 1-5 no less than 3 times.
6.
Press the button (7) (position
7.
indicator (13) lights up blue, set the opera-
tion mode selection knob (14) to the position
« ». When all the solution is in the bowl, set
the operation mode selection knob (14) to the
position « ».
Fill the tank (11) with clear cold water and
8.
repeat the steps 1-5 no less than 3 times
(there's no need to wait for 15 minutes as
described in the step 5).
•
When all the water is in the bowl, set the oper-
ation mode selection knob (14) to the posi-
tion « ».
•
Switch the coffee maker off by pressing the
button (17) .
To make sure that the water supply system and
the cappuccinator pipe are clean, repeat the
step 8 at least 3 times.
Note: To remove the scale you can use special
descaling agents for coffee makers and coffee
machines, strictly following the instructions on
their usage.
TROUBLES AND TROUBLESHOOTING
Problem
The unit is not switched on No voltage in the mains socket.
Water leaks from the lower
part of the unit
Coffee leakage from
the filter holder
Coffee is pouring out
into the cup too long
or is not running at all.
Ready coffee has
a foreign smell
VT-1502.indd 8
www.101kofemashina.ru помогает выбирать кофейную технику с 2010 г.
CLEANING
•
). After the •
•
•
Drip tray (1)
•
STORAGE
•
•
•
Cause
The power plug is not completely
inserted into the socket.
The water tray is full.
Untight connection of filter and
boiler gasket, ground coffee
got on the edges of the filter.
The coffee powder is too fine
or it is tamped too strongly
in the filter.
Wrong process of scale removal
in the boiler of the coffee maker.
Improper storage of coffee.
8
If during the filter (6) cleaning you find out that
the openings are blocked with ground coffee
remnants, you can clean them with a small brush.
Clean the coffee maker body with a soft damp
cloth, and then wipe the unit body dry. Do not
use metal brushes or abrasives.
Never immerse the coffee maker body into
water or other liquids.
Wash the removable parts of the coffee maker
with warm water and a soft detergent, then
rinse them and dry.
Remove the grid (2) from the tray (1), remove
the tray (1) and pour out its contents, wash
the tray (1) and put it back to its place, put the
grid (2) on the tray (1).
Clean the coffee maker before taking it away
for long storage.
Do not store the coffee maker at temperatures
below 0°C.
Keep the coffee maker away from children in
a dry cool place.
Solution
Make sure that the socket
is properly operating.
Check whether the plug
is completely inserted into
the socket.
Pour out water from the tray.
Clean the edges of the filter.
Use ground coffee for espresso
coffee makers.
Experimentally adjust the tamping
degree of coffee in the filter
depending on the coffee grinding
degree.
See the sections «Washing the water
supply system» and «Descaling»
and perform the procedures
described in them several times.
Use fresh ground coffee.
Keep coffee in a dry cool place.
08.02.2016 10:26:01