Transmitter Display; Transmitter Controls - Shure QLX-D Bedienungsanleitung

Transmitter Display

① Battery Indicator
Bars displayed indicate remaining battery life.
② Home Screen Display: Group and Channel/Frequency/SB900
Battery Runtime
Use the arrow keys to select one of the following home screen
displays:
Group and SB900 battery
Channel runtime
group channel

Transmitter controls

• To increase, decrease or change a parameter, use the ▼▲ buttons
• To save a menu change, press
• To exit a menu without saving a change, press the
Transmitter Menu Options and Navigation
The transmitter features individual menu screens for setting up and adjusting the transmitter. To access the menu options from the home screen, press the
Each additional press of the
menu
① Home Screen
Use the arrow keys to select one of the following home screen
displays:
- Battery Icon/group and channel
- Battery Icon/frequency
- Battery Icon/Battery Runtime (SB900 installed)
② group
Use the arrow buttons to scroll through the groups.
③ channel
Use the arrow buttons to scroll through the channels.
④ frequency
Use the arrow buttons to adjust the frequency. Press and hold
for faster scrolling.
⑤ lock
Select a lock option:
- On = controls locked
- OFF = controls unlocked
⑥ rf power
Select an rf power setting:
- Lo = 1 mW
- Hi = 10 mW
⑦ mic offset dB
Use to match audio levels between two transmitters used
in a combo system. Range is 0 to 21 dB (3 dB increments).
Adjustments occur in realtime.
⑧ battery type
Use to set the battery type to match the installed AA battery
type to ensure accurate battery metering. Menu is not
displayed when Shure SB900 batteries are installed.
Frequency
MHz
enter
button
menu
button advances to the next menu screen.
③ Encryption Status
Icon displayed when encryption is
enabled.
④ Lock
Displayed when transmitter controls
are locked.
⑤ RF Power
RF power setting (Lo or Hi).
⑥ Mic Offset
Displays mic offset level in 3 dB
increments.
menu enter
Bodypack
8
mic o set
dB
7
6
rf power
Tips for Editing Menu Parameters
• To access the menu options from the home screen, press the
additional press of the button advances to the next menu screen.
menu
• A menu parameter will blink when editing is enabled
• To increase, decrease or change a parameter, use the arrow buttons
• To save a menu change, press
• To exit a menu without saving a change, press
6
1
2
group channel
3
Handheld
MHz
1
2
group channel
3
group channel
5
4
menu
enter
menu
5
4
rf power
mic o set
dB
MHz
button.
menu
MHz
button. Each
15