Warnings And Precautions - Cochlear Baha Divino Handbuch

Accessories
Several accessories are available to enhance
your sound experience in different contexts. To
ensure the smooth operation of your Baha, only
use Cochlear original accessories or accessories
approved by Cochlear. See figure
Direct audio input and microphone settings
The sound processor has a three-pin DAI (Direct
Audio Input) port designed for connecting external
equipment. This can be used in program 1, for
safety reasons you will still be able to hear sounds
from your surrounding environment. In program 2,
the DAI is not activated so connected accessories
will be muted.
Program setting
Omni directional microphone
Directional microphone
DAI
Attention: The marking on the plug must
match up with the corresponding marking on
the sound processor.
Safety instructions when connecting
external equipment
Only connection cables and accessories that
are supplied or approved by Cochlear should be
used. Non-standard connection cables can cause
damage to the sound processor and injury to you.
If in doubt, consult your audiologist. Cochlear
is not liable for any damages arising as a result
from this or any other form of incorrect use of the
product or its parts.
Caution: It is extremely dangerous
and potentially fatal to connect any
equipment that is plugged into a 110 and/or
220 V power supply without using the audio
adapter.

Warnings and precautions

• The sound processor is a digital, electrical,
8 • The sound processor is not waterproof! Never
• Do not expose the sound processor
1 2
on off
• This product is not suitable for use in the
off on
• If you are to undergo an MRI (Magnetic
on off
• Dispose of electronic items in accordance with
• Do not dispose of in fire.
medical device designed for specific use. As such,
due care and attention must be exercised by the
user at all times.
wear it in the bath or shower!
to extreme temperatures etc. For
example do not wear it in the
sauna. The sound processor is
designed to operate within
the temperature ranges +5°C
(+41°F) to +40°C (+104°F).
In particular, battery performance deteriorates in
temperatures under +5°C. The device should not
be subject, at any time, to temperatures below
-20°C (-4°F) or above +50°C (+122°F).
presence of flammable materials.
Resonance Imaging) procedure, refer to the MRI
Reference Card included in the document pack.
your local regulations.
English
7