Menu - OHAUS Sapphire JS10 Bedienungsanleitung

Sapphire JS10 and JS500
The balance has been calibrated before shipment, however calibration can be
affected by changes in location, temperature, or rough handling. Check the
balance with a calibration mass. If calibration is required, proceed as follows:
1. With the balance on, press and hold On until
release it.
which must be placed on the pan.
Do not disturb the balance while
2. Place the required mass on the pan and momentarily press On.
3. When the weight on the pan is displayed with the stability indicator, the
balance is calibrated.

MENU

The User Menu permits you to activate the Auto Shut-off feature and Linearity
calibration (calibration masses are required).
1. With the balance off, press and hold ON until
release it. The first menu item
2. Repeatedly press Mode to display the desired menu item to be used or to
exit, press Mode until
Menu
A. Off - Set to On or Off.
UNITS - g, oz, ozt, dwt, ct, , t, t, t, pc
LIN - Performs linearity calibration.
END - Exit menu and store settings.
Taels - t= Hong Kong, t= Singapore, t= Republic of China
= GN (Grains)
Taels and Grains included on JS10 only.
2 Text new.pmd
will be displayed followed by the value of the mass
will be displayed.
is displayed, then press On.
t
t
t
7
is displayed, then
is displayed.
is displayed, then
6/10/2004, 9:53 AM
EN-7