Calibration - OHAUS Sapphire JS10 Bedienungsanleitung

EN-6
Parts Counting (Cont.)
1. Start with the balance ON in a weighing mode.
2. Place a container on the pan and press O/T to tare it.
3. Press On until
,
pc
4. Repeatedly press Mode to change the reference sample to either 5, 10, 20,
50 parts.
5. Add the selected reference number of parts to the container, then press On.
The display shows the number of parts added.
6. Add parts to be counted and read the quantity on the balance display.
7. To read the weight of the parts, press Mode to change to any of the
activated weighing units.
8. To return to a weighing mode, press Mode to select a weighing unit, the
display indicates the weight of the container as a negative value. Simply
press O/T to tare the balance. Taring the balance does not affect the
sample weight which is stored and retained as long as the balance
remains on.
9. You can return to parts counting at any time by repeatedly pressing Mode
until the parts counting indicator is displayed. To count similar parts, place
a container on the pan and press O/T, then place parts in the container.
The balance displays the number of parts.

CALIBRATION

Calibration masses are available for checking and calibrating the balance.
Balance
JS10
JS500
2 Text new.pmd
is displayed. When On is released,
is displayed depending on what was last entered.
pc
Required Calibration Masses
10g Included
200g Included
6
Sapphire JS10 and JS500
, or
pc
6/10/2004, 9:53 AM
,
pc