Initial Calibration - OHAUS C51-Serie Bedienungsanleitung

EN-2
AC Adapter Installation
Connect the AC adapter power cord to the instrument's power input connector, and then connect the AC plug to a suitable
electrical outlet.
Attention: Only use an AC adapter specified by OHAUS.
2.3 Lev elling the Instrument
Some models include leveling feet and a level indicator. To level these instruments, adjust the feet so the bubble is centered
in the circle of the level indicator. Be sure the equipment is level each time its location is changed.
2.4 Wall/ Base Mount
A Wall / Base mounting bracket and screws are provided.
Base mounting:
Models: C51XE6R, C51XE30R, C51XE50R, C51XE200R:
W all mounting (Option):

2.5 Initial Calibration

For best results, the instrument's calibration should be checked prior to first use. If adjustment is needed, refer to the
Calibration section of the instruction manual.
Models: C51XE30L, C51XE50L, C51XE100L ,C51XE200L,
C51XE30X, C51XE50X, C51XE100X, C51XE200X: