Maintenance; Warranty - TESTBOY 26 Bedienungsanleitung

COAX TESTING
1. To test unterminated coax, connect red to outer shield and black to center conductor or red to outer shield and black to
ground.
2. To test terminated coax, connect red to connector housing and black to center pin or red to connector housing and black
to ground.
CAUTION
The Testboy 26 is voltage‐proof up to 100V. Identifying a live wire is not possible with the Testboy 26.
Plead remember that to avoid an electric shock or personal injury.
MAINTENANCE
The amplifier probe is maintenance free except for battery replacement. Remove the screw from the battery compartment, replace
the 9V battery and reassemble.
Warranty limited solely to repair or replacement；no warranty of merchantability, fitness for a particular purpose or consequential
damages.
WARRANTY
As an ISO 9001 certified enterprise we guarantee you a constant high quality of our products. This makes us possible to grant you a
guarantee of 3 years on our Testboy‐products.
FIELDS OF APPLICATION
The tool is intended for use in applications as described in the operating instruction only. Any other form of usage is not permitted
and can lead to accidents or destruction of the device. Any misuse will result in the expiry of all guarantee and warranty claims on
the part of the operator against the manufacturer.
This operating instruction is provided with large care. For the correctness and completeness of the data, illustrations and designs
no guarantee is taken over. Subject to change.
Declaration of conformity
This product fulfils the specifications contained in the Low Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC.
DISPOSAL OF THE ARTICLE
Dear Customer, please help avoiding refuse.
If you at some point intend to dispose of this article, then please keep in mind that many of its components consist of
valuable materials, which can be recycled.
Please do not discharge it in the garbage bin, but check with your local council for recycling facilities in your area.
6