ausdom ANC8 Bedienungsanleitung Seite 3

10 11
1.Microphone
2.3.5mm line-in jack
3.Power button
4.Previous track/V-
5.Next track/V+
6.LED Indicator/Charging LED
7.Micro USB interface for charging
8.Noise canceling LED indicator
9.Noise canceling on/off
10.Micro USB Charging Cable
11.3.5mm Audio Cable
4. Charging the Battery
Use the supplied micro USB charging cable to recharge the
battery. It takes about 2 hours for the first charge and after
charging for as long as 1-1.5 hours. The headphone LED
turns to solid red during charging. When the battery is fully
charged the LED turns off.
You can also use the Wireless function during charging but
will extend the charging time. If you use the audio cable or
turn the headphone off for charging that will not affect the
charging time.
When the battery is low, the LED flashes red light. At the
same time the headphone also provides a low battery
warning tone.
Note: It is strongly recommended fully charging for the first
use. Playtime varies according to volume level and audio
content .
EN-2