ausdom ANC8 Bedienungsanleitung Seite 4

Micro USB charging cable to the USB Interface for charging
5.Pairing with Wireless Devices
5-1 Pairing the headphones with a computer
Before pairing the headphone with your computer, please
make sure your computer or laptop has the built-in Wireless
feature. If not, you must purchase a Wireless dongle,
preferably version 2.1 or above.
1.Make sure the headphone is off.
2.Start the Wireless program in the computer.
3.The "Search new device" screen will be displayed.
4.Do not place both devices more than one meter away
from each other.
5.Press and hold the power button on the headphone until
it powers on but don't let go just yet. Continue holding down
on the power button until you see the LED indicator flashes
blue and red alternately, which means your headphone is in
"pairing mode" waiting to be paired with your device. You
will hear a prompt.
6.As soon as the computer system detects the new device
and select "AUSDOM ANC8". Once successfully paired,
the LED turns to solid blue. You will hear a prompt.
5-2 Pairing the headphone with a phone
1.Make sure the headphone is off.
2.Do not place both devices more than one meter away
from each other.
EN-3