ausdom ANC8 Bedienungsanleitung Seite 5

3.Press and hold the power button on the headphone until
it powers on but don't let go just yet. Continue holding
down on the power button until you see the LED indicator
flashes blue and red alternately, which means your
headphone is in "pairing mode"waiting to be paired with
your device. You will hear a prompt.
4.Start Wireless function on your phone and search for new
devices.
5.Select the "AUSDOM ANC8" to pair. Once successfully
paired, the LED turns to solid blue. You will hear a prompt.
5-3 Connecting to paired devices
AUSDOM ANC8 will pair with the last paired device
automatically when turning on. Because of different
systems, some computers or laptops may need to be
manually paired every time.
6. Active Noise Cancelling
AUSDOM ANC8 contains a noise canceling circuit, Noise
mainly in an airplane, buses or trains is effectively reduced.
1).The noise canceling effect may not be pronounced in a very
quiet environment, or some noise may be heard.
2).The noise canceling effect may vary depending on how you
wear the headphones.
3).The noise canceling function works for noise in the low
frequency band primarily. Although noise is reduced, it is not
canceled completely.
4).When you use the headphones in a train or a car, noise
may occur depending on street conditions.
EN-4