Maintenance; Electric Connections - Rib R50 Bedienungsanleitung

G
B
ELECTRICAL SAFETY DEVICES
The installation must be installed according to the current regulations and laws.
Use the T2 electronic control unit.
For connections and technical data of accessories refer to the appropriate booklets.

ELECTRIC CONNECTIONS

AERIAL
COAX
SIGNAL
R=2,2KΩ
BUZZER
+
-
24 Vdc for
+
AUTOTEST EDGE
-
24 Vdc for
+
ACCESSORY
-
SUPPLY
+
PHOTOCELL
EDGE
K BUTTON
PED. BUTTON
COM

MAINTENANCE

To be undertaken by specialized staff after disconnecting power supply.
Clean the wheel contact surfaces carefully once a week.
Check wheel/ground pressure and condition of motor wheels every six months.
The motor should be overhauled every two years and the oil replaced.
POWER SUPPLY
28
T2 code AC07086
T2 CRX code AC07085
LSC1 - limit switch close M1
LSO1 - limit switch open M1
LSC2 - limit switch close M2
LSO2 - limit switch open M2
BLINKER
LSO2
CAPACITOR M2
MOTOR 2
LSC2
LSO1
CAPACITOR M1
MOTOR 1
LSC1