Basic Operations; Choosing A Program - Sony DPS-V55M Bedienungsanleitung

Basic Operations

U

Choosing a Program

The processor comes with 200 different preset programs
(numbers 001~200) as well as room for 200 user programs
for storing the programs you create (numbers 201~400). Use
the following procedure to choose the program you desire.
1
Press U to turn on the power.
After a few seconds, the play mode screen appears.
0 0 1 S u p e r R e v e r b
F x A : 1 1 / F x B : 1 2
2
Turn INPUT LEVEL (1~4) to adjust the input
levels.
If an input level indicator lights red (clip), the input
level for that channel is set too high. Be sure to set the
input level correctly since it has a direct relationship to
the quality of the effects (see page 6 for details).
1 2
10
GB
Level indicators
INPUT LEVEL (1~4)
INPUT LEVEL 3 4
Display
3
Turn the rotary encoder to select a
program (001~400).
The program numbers (and corresponding names)
appear in the display as you turn the jog dial.
Before you turn on the connected components
Be sure to turn the volume level down to avoid an unexpected
output of massive volume.
You can also search programs by effect type
See page 12 for details.
Rotary encoder