Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Operating Instructions
EN
B VD – Smoke exhaust roof fans F400/F600
Example assembly for installation on flat roof:
Flat roof base B FDS
Insulation
Gravel
wedge
Screwed connection of
B FDS with raw concrete ceiling
Dämmung
Raw concrete ceiling
Overview smoke exhaust roof fan B VD . . with accessory parts:
Roof fan attenuator
B HSDV
Smoke exhaust
roof fan
B VD
Base attenua-
tor
B SSD
Flat roof
base
B FDS
B FDS:
− Place smoke exhaust roof fan on flat roof base.
− Ensure that the four threaded bolts in the corners of the flat roof base are properly guided through the provided
drill holes in the base plate.
− Screw smoke exhaust roof fan to flat roof base, washers and nuts provided with flat roof base.
− Observe tightening torque recommended in section 3.7.
B SSD:
− Insert base attenuator in flat roof base.
− Ensure that the four threaded bolts in the corners of the flat roof base are properly guided through the provided
drill holes in the support frame of the base attenuator.
− Place smoke exhaust roof fan on flat roof base, the base attenuator is screwed together with the fan.
− Observe tightening torque recommended in section 3.7.
Vapour barrier
Bitumen (sealant)
Roof opening
Deflector
B DEF
Smoke exhaust
roof fan
B VD
Base attenua-
tor
B SSD
Flat roof
base
B FDS
8
Fig .7
Fig .8
Werbung
Kapitel
Inhaltsverzeichnis
