Alarm Recording; Connecting An Alarm Sensor; Setting The Alarm Speed And Duration - Sony SVT-N72P Bedienungsanleitung

Alarm Recording

You can use a door switch or alarm sensor to trigger
alarm recording. You can make alarm recording in
recording mode and stop mode with the selected
recording speed during selected duration.

Connecting an Alarm Sensor

Commercially available
switching box, etc.
to COM
to ALARM IN
Setting the Alarm Speed and
Duration
1
1
Turn on the power of the equipment to be used.
2
Press MENU and MENU V until "4" of the MAIN
MENU flashes on the monitor screen.
32
to ALARM OUT
to COM
2-5 6
3
Press MENU B.
The ALARM SET menu appears.
4
Press MENU V to move the flashing to the setting
of ALARM SPEED and set it by pressing MENU +
or –.
Set ALARM SPEED to 3H, 12H, 24H or NC by
pressing MENU + or –.
3H: for recording in 3-hour mode
12H: for recording in 12-hour mode
24H: for recording in 24-hour mode
NC: for recording at the same speed as before the
alarm was received.