Recording - Sony SVT-N72P Bedienungsanleitung

Recording

This section shows you how to record the signal from
the video camera in the normal or time lapse mode, to
set the security lock, to record repeatedly on the same
cassette and series recording.
1
1
Turn on the power of the equipment to be used.
2
Insert the cassette.
3
Set the recording speed by pressing REC/PLAY
SPEED + or –.
Record- Maximum recording Interval Audio
ing time with 180-
speed minute tape
3 Standard 3
mode
Time
12 15
lapse
24 27
mode
48 51
72 75
Note
In time lapse mode, it is possible to record additionally
3 hours longer than the displayed recording time.
In the display window
STOP x
3
2 4
PAUSE X
Tape
recording motion
1/50 Possible Continuous
0.1
0.18
0.34 Impossible Intermittent
0.5
Recording speed
4
Press REC z.
Recording starts.
To stop recording
Press STOP x.
To pause recording
Press PAUSE X.
To resume recording, press the button again. If pause
continues for more than 5 minutes, the VCR
automatically stops.
If recording does not start and the cassette is
ejected
The tab on the cassette is removed to protect against
accidental recording. Use a cassette with its safety tab
or cover the safety tab hole with a piece of plastic tape.
Displaying the real time (in recording,
recording pause or stop mode only)
Set the COUNTER/REAL TIME switch to REAL
TIME. The real time will be displayed in the display
window. In playback mode, the display shows the tape
counter regardless of the switch position.
19