If you experience problems, try the following:
•
Turn off any other existing wireless equipment to check whether this is the cause
of the problem.
•
Reposition the wireless equipment, shorten the distance between the transmitter
and the receiver or reduce the number of obstacles (walls, furniture, etc.)
between them.
Buttons and functions
1. Function indicator
-
Flashing blue: the speaker is switched on
and detectable for other Bluetooth devices.
-
Steady blue: the speaker is connected to
an external device via Bluetooth.
-
Steady red: an external device is connected
to the AUX IN socket (11).
-
Steady green: a microSD card is inserted in
the memory card slot (9).
2. Microphone.
3. [
] Light mode selector
4. [ ►ll ] Play/pause. Hold down in Bluetooth
mode to make the speaker detectable for other
devices again. When receiving a call, a short
press of this button will answer an incoming
call and another short press will end it. Holding
the button down will reject an incoming call.
5. [ + ] Hold down to raise the volume, short
presses will advance you through the playlist.
6. [ – ] Hold down to lower the volume, short
presses will move you backwards through
the playlist.
7. [
] Hold down to switch the speaker on/off.
Short presses will toggle the playback mode
between Bluetooth and microSD card/AUX IN.
8. MicroSD card slot
9. USB port for charging electronic devices
10. DC 9V: Mains adaptor socket
11. 3.5 mm AUX IN
12. Reset
13. LED indicator which shines red while the battery
is charging and goes out when the battery is fully
charged.
4
1
2
3
4
5
6
7
8
9 10 11 12 13