Description Of The Control Unit; Technical Specifications - V2 City7 Bedienungsanleitung

DESCRIPTION OF THE CONTROL UNIT

The CITY7 control unit is an innovative V2 product
guaranteeing safety and reliability for swing gate
automation.
The CITY7 design has been aimed at creating a
product which adapts to suit all needs, thus
obtaining an extremely versatile control unit
satisfying all the necessary requirements for a
functional and efficient installation.
• 230V - 50Hz or 120V - 60Hz power supplies,
depending on the model, for 2 single phase
motors (700W global).
• Input for keyswitch or push-button.
• Input for safety photocell.
• Input for safety edge, capable of handling
standard edges with switch normally closed and
conductive rubber edges with nominal resistance
of 8.2 kOhms.
• Pre-opening safety device testing.
• Dip-switch programmable operational logic.

TECHNICAL SPECIFICATIONS

Power supply
Max motors load
Max accessories load 24V
Working temperature
Protection fuse
Dimensions
Weight
Protection
• Adjustment of motor power and operation time
by means of a trimmer.
• Quick plug-in connector for inserting a Mr1
series receiver.
• LED monitoring of inputs.
• Courtesy light output.
• IP55 casing.
230V models
230V / 50Hz
700W
3W
-20 ÷ +60 °C
F1 = 5A delayed
170 x 185 x 70 mm
15
120V models
120V / 60Hz
700W
3W
-20 ÷ +60 °C
F1 = 8A delayed
800 g
IP55