Toshiba RAS-M10SMUV-E Installations-Handbuch Seite 14

REQUIREMENT
Before installation of the indoor unit be sure to remove the transportation cushion found between the fan and the bell mouth.
Running the unit without removing the cushion may damage the fan motor.
Installation of ceiling panel (Sold separately)
Install the ceiling panel after completion of the installation of the indoor unit, including all piping and wiring.
Install the ceiling panel as per the supplied Installation Manual.
Check the installation dimensions of the indoor unit and the ceiling opening are correct and then install.
REQUIREMENT
Ensure the ceiling panel is mated to the ceiling surface or the indoor unit.
If the panel and unit are not mated together this may result in the formation of dew condensation causing a possible water leak.
First remove the 4 corner caps from the ceiling panel and fit to the indoor unit.
EN
Be sure to remove the cushion for transportation
between the fan and the bell mouth.
10