Installation; Unpacking And Positioning - Pkm EB-GK2-TC Bedienungsanleitung

wish to emphasize that this compliance does not negate the fact that the
surfaces of the appliance will become hot while operating and will retain
and emit heat even if it has stopped operating.
1. The appliance must be transported and installed by at least two persons.
2. The hob should be clean at every time. Soiled cooking zones do not transfer the
heat properly.
3. Do not put any heavy items onto the glass-ceramic.
4. Do not operate the appliance unless all components are installed properly.
5. Do not stand or lean on the appliance.
6. The air vents of the appliance or its built-in structure (if the appliance is
suitable for being built-in) must be completely open, unblocked and free of any
kind of dirt.

2. Installation

2.1 Unpacking and positioning

1. Unpack the appliance carefully. Dispose of the packaging as described in
chapter waste management.
2. Completely remove the transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of the transport-
protection.
3. Check that the appliance and the power cord are not damaged.
4. Connect the appliance to a dedicated socket only.
5. Do not install the appliance in a place where it may come in contact with water
or rain; otherwise the insulation of the electrical system will be damaged.
NOTICE
22