Product Information; Product Description; Scope Of Delivery - Siemens 1FT6 13 Bedienungsanleitung

2

Product information

2.1

Product description

Motors of series 1FT6 are permanent magnet excited, three-phase synchronous motors
(three-phase servomotors) for operating with pulse-width-modulation inverters according to
the sinusoidal current principle.
The motors have been designed for feed drives in machine tools, drive units in production
machines, and for drives in general mechanical engineering.
2.2

Scope of Delivery

The drive systems are put together individually. Immediately upon receipt of delivery, check
whether the scope of delivery corresponds with the consignment notes. SIEMENS cannot
accept any liability for any shortages or deficiencies reported at a later date.
Complaint instructions:
- Report detectable transport damage immediately to the carrier.
- Report detectable defects / incomplete delivery immediately to the responsible
SIEMENS representative.
The operating manual is part of the scope of delivery and shall therefore be kept in an
accessible place.
As the delivery includes a separate type plate, the motor data must also be kept on or near
the machine or system.
12
ENGLISH
610.43 600.21 Siemens AG