Description Of Unit; Intended Use; Requirements; Hardware - Bosch BEA 460 Produktbeschreibung

3.

Description of unit

!
The BEA 460 is only to be operated in enclosed
workshop areas. Protect the BEA 460 against
moisture.
3.1

Intended use

The mobile Bosch Emissions Analyzer, referred to in the
following as BEA 460, is designed to permit the user-
friendly implementation of exhaust gas measurements on
vehicles.
The range of test specimens includes the entire
spectrum of gasoline and diesel road vehicles on
which emission measurements have to be performed
during workshop inspections, both to comply with legal
requirements and for the purposes of localizing and
rectifying faults.
In Germany, the BEA 460 is approved for the
performance of exhaust emission tests as per §47a
StVZO (Road Traffic Licensing Act) on vehicles with
spark ignition engines.
The test procedures conform to the "Directive for
the assessment of user prompting for exhaust gas
analyzers" dated 23rd June 1994. The BEA 460 is
subject to the mandatory calibration requirement for
exhaust analyzers and must be calibrated once a year.
The BEA 460 is a modular mobile system for the
measurement of diesel and gasoline emissions.
In addition to speed and temperature, the BEA 460 with
DTM (speed/temperature module) can record angle-
based measurement quantities (dwell angle, ignition
point and start of delivery measurement).
3.2

Requirements

The BEA 460 can only be used in conjunction with a
Laptop / PC with an installed emission system analysis
program.
Robert Bosch GmbH
Description of unit | BEA 460 | 21
3.2.1

Hardware

BEA 460 system requirements:
R
IBM-compatible Laptop or PC with Windows XP or
Windows Vista
R
DVD/CD drive
R
A vacant USB interface for the Bluetooth USB
adapter
3.2.2

Software

Emission system analysis software installed on Laptop /
PC. Details of operation and software installation can be
found in the program description included in the scope of
delivery.
3.3

Scope of delivery

Designation
Adapter cable for connection of clip-on trigger
and connecting cable term.1/TD/TN/EST
Connecting cable term.1/TD/TN/EST
Clip-on trigger (6 m)
Connecting cable for Bluetooth
serial adapter
Connecting cable for
cigarette lighter socket and
adapter cable with battery terminals
Bluetooth serial adapter
Power cord
Exhaust gas sampling probe
for gasoline pass. veh.
Exhaust gas sampling hose
for pass. veh. (8 m)
Coarse filter GF1
Oil temperature sensor for
passenger vehicles
(80 cm immersion depth)
Remote control
*)
USB remote control reciever
*)
USB connecting cable 1 m
*)
RTM 430
*)
RTM Underframe
*)
Adapter cable for RTM connecting cable
*)
Exhaust gas sampling hose
pass. veh. (Diesel) and
*)
exhaust gas sampling hose 1 m
Exhaust emission test software package
KTS 540 with
*)
power supply unit and
*)
power cord
*)
OBD diagnosis cable 1.5 m
USB connecting cable 3 m
*)
Serial connecting cable
*)
Bluetooth USB adapter for PC
Operating manuals
Depending on scope of delivery
*)
BEA 460 | 21 | 21
Order number
1 684 463 442
1 684 460 196
1 687 224 842
1 684 460 278
1 684 460 213
1 684 463 403
1 687 023 474
1 684 461 106
1 680 790 049
1 680 706 043
1 687 432 005
1 687 230 042
1 687 246 019
and 1 687 247 028
1 684 465 491
1 687 022 599
1 685 200 082
1 684 465 594
1 680 790 044
1 680 703 047
*)
1 687 000 580
1 687 023 393
1 687 022 889
1 684 461 106
1 684 465 555
1 684 465 562
1 684 465 371
1 684 023 449
1 689 979 566
1 689 979 922
1 689 979 659
1 689 979 987
1 689 979 994
1 689 989 015
1 689 989 027
| |
1 689 989 027 2009-03-26
en