Device Description; Using The Device - Sanitas SFS 40 Gebrauchsanleitung

4. Device description

1. Facial sauna steam mask for the entire face
2. Water container
3. Basic unit
4. Maximum filling level
5. Rotary switch
6. Indicator light
7. Aroma attachment
8. Steam valve (reverse)
9. Steam disc
10. Measuring cup

5. Using the device

This device is intended only for use on the human face.
Using the facial sauna provides an ideal basis for cosmetic facial care. The skin of your face is prepared
optimally for further treatments such as deep cleansing, moisturising, face masks etc.
Beauty salons very often begin facial treatments with a steam treatment. The invigorating steam
increases the skin circulation, the pores are opened and impurities are removed more easily.
You can thus provide the perfect basis for every kind of facial care. The skincare products penetrate
deep into the skin through the opened pores, thus optimising their action.
5.1 Operation
Place the device on a flat, firm, level and water-insensitive surface or on a table.
Use the measuring cup to fill the device's water container with water. Do not exceed the maximum filling
level.
You should never fill the container directly under running water but only use the measuring cup that
comes with it. The water volume at maximum filling level is enough for about 20 minutes use.
Do not use oils, herbs or other aromatic substances as a substitute for water but only added to adequate
water filling.
Fix the steam mask onto the basic unit by turning it.
Ensure that the mask engages firmly with the knobs.
5.2 Using the facial sauna
Uncoil the cable fully. Plug into the socket. Then turn the switch clockwise until the red indicator lights
up. Turn the switch first to position "2" in order to speed up heating. After about 5 minutes, steam begins
to rise. Turn the switch back to position "1" to reduce the steam output.
Adjustable steam outlet
You can also regulate the strength of the steam outlet by turning the steam disc.
When the steam outlet is closed, the steam comes out of the steam valve which is located on the back
of the device or mask. The water heating phase can also be shortened by closing the steam disc.
To avoid burns, never touch the steam outlet directly and ensure that the steam can come out of the
valve freely.
Now sit down in front of the device. Bend forward until your face is above the mask.
If the steam feels too hot, increase the distance in order to avoid burns.
Caution:
During the treatment, you should always turn the switch back to position "1".
Do not keep your face too close to the mask as otherwise burns can occur because of the intensity of
the steam.
When you want to stop using the device or the water has evaporated, turn the switch back to position
"0". The device's indicator goes out.
Rinse your face with cold water after use. Then apply a face cream or mask. The opened pores let the
active ingredients penetrate deep into the skin.
Do not use the facial sauna for more than 20 minutes per day. Using it 2–3 times a week is recommended.
1
7
9
2
4
6
5
3
6
8
10