Device Description; Using The Device - Sanitas SFS 40 Gebrauchsanleitung

3. Important instructions for after use
- After use, switch off the device and unplug it.
- Never unplug it with wet hands or by pulling on the cable.
- Empty any remaining liquid from the side of the vaporizer. Ensure that no liquids can get into the
device through the switch, the cable or the bottom of the device.
- The device should be cleaned after use to avoid the collection of grease and other residues. This
ensures optimal operation and prolongs the working life of the device.
- Let the device cool down fully before operating it again.
- If you have any further questions about using our devices, please consult your dealer or the
Customer Service department.

4. Device description

1. Facial sauna steam mask for the entire face
2. Water container
3. Basic unit
4. Maximum filling level
5. Rotary switch
6. Indicator light
7. Aroma attachment
8. Steam valve (reverse)
9. Steam disc
10. Measuring cup

5. using the device

This device is intended only for use on the human face.
Using the facial sauna provides an ideal basis for cosmetic facial care. The skin of your face is prepared
optimally for further treatments such as deep cleansing, moisturising, face masks etc.
Beauty salons very often begin facial treatments with a steam treatment. The invigorating steam
increases the skin circulation, the pores are opened and impurities are removed more easily.
You can thus provide the perfect basis for every kind of facial care. The skincare products penetrate
deep into the skin through the opened pores, thus optimising their action.
5.1 Operation
Place the device on a flat, firm, level and water-insensitive surface or on a table.
Use the measuring cup to fill the device's water container with water. Do not exceed the maximum filling
level.
You should never fill the container directly under running water but only use the measuring cup that
comes with it. The water volume at maximum filling level is enough for about 20 minutes use.
Do not use oils, herbs or other aromatic substances as a substitute for water but only added to adequate
water filling.
Fix the steam mask onto the basic unit by turning it.
Ensure that the mask engages firmly with the knobs.
5.2 using the facial sauna
Uncoil the cable fully. Plug into the socket. Then turn the switch clockwise until the red indicator lights
up. Turn the switch first to position "2" in order to speed up heating. After about 5 minutes, steam begins
to rise. Turn the switch back to position "1" to reduce the steam output.
Adjustable steam outlet:
You can also regulate the strength of the steam outlet by turning the steam disc.
When the steam outlet is closed, the steam comes out of the steam valve which is located on the back
1
7
9
2
8
4
6
5
3

10